Skip to content

How to choose a cryocan size

UPADI · Published · 5 sources

Direct answer: an AI technician going door to door needs a 1.5, 2 or 3 litre field cryocan, the size the DAHD SoP lists in the AI kit. A farm or breeder keeping its own semen usually needs a medium storage can of about 20 litres. AI centres and semen banks use 35 to 55 litre storage containers and refill the field cans from them.

Choose by three questions: how many straws you store, how far and how often the can travels, and how often you can get liquid nitrogen.

Three kinds of user

User Typical need Sizes to look at
AI technician or MAITRI on field rounds Carry a day's doses to the farmer's door; light, narrow neck 1.5 to 3 litre, as in the DAHD SoP kit list
Dairy farm or breeder with its own semen Store straws for weeks between nitrogen deliveries Medium storage cans; Semex describes a "standard 20-liter farm tank" (Semex)
AI centre, semen bank or district store Hold many canisters; refill field cans 35 to 55 litre storage containers; NDDB Dairy Services tendered 35, 47 and 55 litre containers for the Rashtriya Gokul Mission (NDDB DS tender, 2025)

Specs of models with consistent data

The table below uses only the specs on UPADI's product pages, and only for models where capacity, evaporation loss and holding time agree with each other. These are static figures for a full, closed can. They are not yet checked against the manufacturer's datasheet, which UPADI has asked for.

Model Capacity (L) Evaporation loss (L/day) Static holding time (days) Neck (mm) Canisters Straws 0.5 ml / 0.25 ml
BA-2X 2.5 0.125 18 51 6 720 / 1,560
BA-7 7 0.135 58 51 6 720 / 1,560
TA-26 26 0.25 102 51 not listed not listed
BA-35 33.3 0.30 111 51 6 not listed
TA-35 35 0.30 120 51 not listed not listed
TA-55 51.5 0.43 120 51 not listed not listed

Source for every row: the linked UPADI product page (catalogue specs, November 2026).

Specs to be confirmed

These models are sold by UPADI, but their listed specs contradict each other or copy another model, so we leave them out of the table until the datasheet arrives:

Model Why it is held back
BA-3 and BA-11 Both pages show identical rows (0.135 L/day, 29 days), which cannot be right for 3 and 11 litre cans. To be confirmed.
BA-0.5 and BA-1.5 Both pages show 0.097 L/day and 15 days. To be confirmed.
BA-42 and J12 Identical rows (0.38 L/day, 124 days). To be confirmed.
BA-20 20.5 L at 0.21 L/day gives about 98 days, not the 197 listed. To be confirmed.
BA-23 23.5 L at 0.118 L/day gives about 199 days, not the 67 listed. To be confirmed.
Inox, Cryogem and Cryoseal models No evaporation or holding time figures on the pages yet.

Ask UPADI for the datasheet of any of these before you buy; we will add them when confirmed.

What the numbers mean

  • Evaporation loss is how many litres boil off per day when the can stands closed.
  • Static holding time is how many days a full, closed can takes to boil dry. In the table above it is close to capacity divided by evaporation loss.
  • Working holding time is shorter. MVE's XC 20 spec sheet lists 20.5 L and 0.090 L/day (about 228 static days by that division) but a "normal working duration" of 142 days, and notes that real figures depend on use and conditions (MVE spec sheet).

For planning with your own usage, see LN2 refill planning.

A benchmark from a government tender

NDDB Dairy Services set these minimums when buying containers for the Rashtriya Gokul Mission (tender, June 2025). They are useful as a yardstick when you compare datasheets.

Size class Static evaporation rate Static holding time Other
3 litre ≤ 0.2 L/day ≥ 20 days Neck about 30 mm
23 litre ≤ 0.15 L/day ≥ 150 days At least 6 canisters
50 litre and above ≤ 0.12 L/day ≥ 450 days Filled weight ≤ 61 kg

The tender also asks for test certificates for vacuum retention and static evaporation rate, and at least two years' warranty.

Other points to check

  • BIS standard. Liquid nitrogen vessels up to 75 litres are covered by IS 11552:2020. Ask whether the model is certified.
  • Neck size. A wider neck makes canisters easier to reach but usually means more evaporation. Compare the evaporation figure, not only capacity.
  • Weight when full. Liquid nitrogen is heavy; Semex notes a full 20 litre farm tank weighs about 28 kg (Semex). Think about who lifts it.
  • Nitrogen supply. If your centre gets LN2 once a month, choose a can whose working holding time comfortably exceeds a month.

Related: how long semen lasts in a cryocan, cryocan care and maintenance.

Questions and answers

Which cryocan size does an AI technician need?

The DAHD SoP lists a 1.5, 2 or 3 litre cryocan in the AI technician's field kit. A larger storage container usually stays at the AI centre.

What does holding time on a cryocan mean?

It is the number of days a full, closed, unused container takes to boil dry. Manufacturers call it static holding time. Real use with frequent opening gives fewer days.

Is there an Indian standard for cryocans?

Yes. BIS IS 11552:2020 covers liquid nitrogen vessels of capacity up to 75 litres.

Sources

  1. Standard operating procedures for Artificial Insemination Technicians / MAITRIs (OM dated 24 January 2026), Department of Animal Husbandry and Dairying, Government of India (hosted by Odisha DAHVS) (accessed 2026-11-19)
  2. Bidding Document for LN Container Supply for RGM and Semen Station of NDDB Dairy Services (June 2025), NDDB Dairy Services (hosted by Alamadhi Semen Station) (accessed 2026-11-19)
  3. MVE XC Series Animal Health Spec Sheet (ML-000020 Rev 0), MVE Biological Solutions (accessed 2026-11-19)
  4. Semen Tank Management: A Dozen Do's and a Few Don'ts, Semex (article by Bruce Poulin, Progressive Dairyman) (accessed 2026-11-19)
  5. IS 11552:2020 Liquid Nitrogen Vessels of Capacity up to 75 Litres, Specification, Bureau of Indian Standards (accessed 2026-11-19)

Products in this article

All UPADI Knowledge articles