Skip to content

Heat signs and the best time for AI in cows and buffaloes

UPADI · Published · 5 sources

Direct answer: use the AM/PM rule. If you first see the animal in heat in the morning, inseminate in the evening; if you first see it in the evening, inseminate the next morning (TANUVAS, via Vikaspedia). Buffaloes ovulate later than cows, so do not inseminate a buffalo too early.

Signs of heat

The DAHD SoP gives one sign as the best: clear, transparent, viscous and ropy vaginal discharge. TANUVAS lists these signs for cattle and buffaloes (Vikaspedia):

  • standing to be mounted by other cows;
  • trying to mount other cows;
  • stringy mucus hanging from the vulva, or smeared on the buttocks;
  • restlessness and frequent bellowing;
  • a drop in milk yield and less feed intake;
  • other cows resting their chin on her rump; tail raising;
  • swollen vulva;
  • frequent urination.

How long heat lasts

Cattle Buffalo
Heat cycle length 21 days (14 to 29) 21 days (18 to 22)
Duration of heat signs 18 hours (12 to 30) 21 hours (17 to 24)

Source: TANUVAS Expert System, on Vikaspedia.

Watching for heat

  • Observe dairy animals for heat at least three times a day (TANUVAS, via Vikaspedia).
  • In buffaloes heat is often silent. The same page advises watching them 4 to 5 times from early morning to late night, and says weak or silent heat is most common in buffaloes and after calving.
  • Silent heat needs a rectal examination by a qualified veterinarian (same source).

What the timing studies found

Indian field study, cows and buffaloes

An ICAR journal study of 184 village cows and 142 buffaloes (Srivastava, Sahni and Mohan, Indian Journal of Animal Sciences, 1998) measured conception by hours from the first heat signs:

Animal Hours after heat signs Conception
Cow 0 to 6 none
Cow 7 to 10 47.05%
Cow 11 to 14 53.72% (highest)
Cow after 14 falling
Cow 31 to 48 none
Buffalo up to 10 none
Buffalo 19 to 22 40.00%
Buffalo 23 to 26 50.00% (highest)

The authors link the later best time in buffaloes to their "delayed ovulation". The study is old and small, but it is Indian field data and it fits the AM/PM rule for cows.

US research on the AM/PM rule

UW Madison Extension summarises the evidence (UW Madison):

  • The rule means AI about 12 hours after heat is first seen.
  • In a study it cites (Dransfield and others, 1998), conception was highest when AI was 4 to 12 hours after heat began: 50.9% at 4 to 8 hours and 51.1% at 8 to 12 hours, falling to 28.1% at 16 to 20 hours.
  • In another (Nebel and others, 1994), once a day AI gave a similar result to twice a day AM/PM breeding (60.6% against 60.1% non return).
  • "There is more risk in breeding a cow too late than too early."
  • Sexed semen "is less forgiving on AI timing errors than conventional semen."

These are Holstein herds in the USA, not Indian breeds or buffaloes. Penn State Extension gives a similar window of four to 16 hours after the onset of standing heat (Progressive Dairy).

A practical timing table

First seen in heat Cow Buffalo
Morning Inseminate the same evening Same evening at the earliest; the Indian study found the best result at 23 to 26 hours, so next morning may suit better. Ask your veterinarian.
Evening Inseminate next morning Next morning, or later the same day

The cow column is the AM/PM rule from TANUVAS. The buffalo column combines that rule with the 1998 study; TANUVAS gives the same AM/PM rule for both species.

After AI

The SoP asks the farmer to call for a repeat AI if heat signs continue 18 to 24 hours after AI, and otherwise to watch for heat again at 18 to 21 days and 36 to 42 days (DAHD SoP). TANUVAS also says an animal under 250 kg body weight is not suitable for breeding (Vikaspedia).

Related: AI procedure step by step, common AI failures, sexed semen.

Anoestrus, repeat breeding and hormone treatment are decisions for your veterinarian.

Questions and answers

What is the best time for AI in a cow?

Follow the AM/PM rule. If the cow is first seen in heat in the morning, inseminate that evening; if first seen in the evening, inseminate next morning. An Indian field study found the highest conception in cows inseminated 11 to 14 hours after heat signs.

When should a buffalo be inseminated?

Later than a cow. In the same Indian study, buffaloes conceived best when inseminated 23 to 26 hours after heat signs, and none conceived when inseminated within 10 hours. Buffaloes often show weak or silent heat, so watch them several times a day.

What is the best sign that a cow is in heat?

The DAHD SoP names clear, transparent, viscous and ropy vaginal discharge as the best sign. Standing to be mounted by other animals is another strong sign listed by TANUVAS.

Sources

  1. Time of insemination and conception in cows and buffaloes under field condition (Srivastava SK, Sahni KL, Mohan G), Indian Journal of Animal Sciences 68(2), 1998, ICAR (accessed 2026-11-19)
  2. Breeding Management (from Expert System for Cattle and Buffalo, TANUVAS), Vikaspedia, Government of India (accessed 2026-11-19)
  3. Do we still need the AM-PM Rule for the artificial insemination of cattle?, University of Wisconsin Madison Division of Extension (accessed 2026-11-19)
  4. Standard operating procedures for Artificial Insemination Technicians / MAITRIs (OM dated 24 January 2026), Department of Animal Husbandry and Dairying, Government of India (hosted by Odisha DAHVS) (accessed 2026-11-19)
  5. Why cows don't get pregnant (Andrew Sandeen, Penn State Extension), Progressive Dairy (accessed 2026-11-19)

Products in this article

All UPADI Knowledge articles